This guide is for setting up a PPTP VPN connection on OS X Yosemite (10.10) and below. Unfortunately, PPTP VPN is no longer supported on macOS Sierra (10.11) onwards, however you can still connect to our service by selecting the IKEv2 protocol instead following the instructions here: Apple macOS IKEv2 VPN Setup.
Make sure your Mac is connected to the internet and that you are able to browse the web. These instructions were written for Mac OS X Yosemite (10.10) but the steps should be the same for all versions of macOS.
How to set up a PPTP VPN connection on Mac OS. This tutorial shows how to set up a PPTP VPN connection on Mac OS in 5 easy steps. Open System Preferences and click onto Network. Click the + button on the network connections pane. From the drop-down menu, select VPN followed by PPTP then click Create.
While we recommend using our SSL Tunnelblick application as the first option to connect to our service on your Mac, there might be some cases where this might not work well on your network. In this case, you can try this alternative PPTP VPN connection, which is much easier to setup compared to the other protocols.
Not yet registered? It’s quick and easy, Sign Up now!
Make sure your system is connected to the internet
Make sure your system is connected to the internet and that you are able to browse the web. To check your location, please go to our IP Info page, or alternatively go to our homepage and scroll down to this section:
This shows the IP Address and country that you are currently connecting from, in this example, the user is connecting from Singapore.
Getting Started
Open System Preferences and click on Network, click on the plus (+) button in the bottom left hand corner.
Choose VPN Type
You will be prompted to select the Interface and enter a Service Name.
Select VPN for the Interface and then PPTP for the VPN Type.
For the service name, you can enter anything you like, however, we suggest you keep it simple and choose MPN GBR for the U.K service or something similar for whichever country you are connecting to. Alternatively, you can simply call it My Private Network.
Once you’re done, click on Create, and Apply.
PPTP Connection Configuration
You will now have to enter the server address. If you are connecting to our United Kingdom servers, enter gbr.mypn.co, for all other countries, please refer to our FAQ below:
Which Countries Can I Connect To?
Note: If you wish to use our Free service, the servername that you need to use is fre.mypn.co and your connection will be rotated between different countries we have in our Free VPN cluster.
For the Account Name, enter your My Private Network Username that you registered with:
Note: Make sure the Show VPN status is menu bar is checked
Free Pptp Vpn Software For Mac
VPN Authentication Settings
Click on Authentication Settings and enter your My Private Network Password in the Password field, click OK.
Click on the Advanced tab and make sure that Send all traffic over VPN connection is checked. Click on OK and click on Apply. You may now close the network window.
Enabling VPN Connection
Click on the VPN icon in the status bar and click Connect My Private Network (this assumes you called the connection My Private Network).
The icon will show that it is connecting and once connected the timer will be displayed to the right of the icon.
You are now connected
If you now check your IP address again from the IP Info page, your location should show that you are now in the U.K (or which ever country you have connected to).
Note, the server IP address and country name will vary depending on the server or country you are connected to.
Any problems?
Mac Pptp Vpn Client
Unfortunately it doesn’t always go to plan!
Mac Os Pptp Vpn Client
If you have any problems or can’t get connected, please email us at This e-mail address is being protected from spambots. You need JavaScript enabled to view it. We’ll get back to you as soon as possible and try to help.